Professional installation

Dalmivik hardwired lighting should be installed by a qualified electrician according to the product page, included instructions, mounting conditions, and local electrical code. Dalmivik does not provide installation labor, permits, site inspection, structural engineering, or electrical approval.

Before ordering

Review the complete fixture dimensions, ceiling height, hanging length, canopy or backplate size, wall and door clearances, room scale, fixture weight, mounting surface, junction box, structural support, light source, voltage, wattage, dimming components, and controls.

Electrical standard

Dalmivik product pages use 110-120V / 220-240V as the controlled voltage range, 2700K warm light, and dimmable operation. The correct bulbs, drivers, wall controls, and electrical configuration must be compatible with the exact fixture and destination.

Location suitability

Do not assume a fixture is suitable for bathrooms, wet or damp locations, covered outdoor spaces, sloped ceilings, low ceilings, commercial use, or a specific code requirement unless that suitability is stated for the exact product. A room scene is design context and is not an electrical rating.

Inspect before installation

Open and inspect the fixture, finish, glass or stone, hardware, canopy, wiring components, and packaging before installation. If anything is damaged, missing, or inconsistent with the order, do not install it. Keep all packaging and contact support@dalmivik.com.