Alabaster Ring Pendant with Black Frame 19.7"
- Product sizing & specification guidance
- Project quotation enquiries
- Replacement-part enquiries
- Shipping & delivery guidance
- 3-year limited warranty
- Electrical compatibility guidance
SKU: DK261007007
Category: Alabaster Lighting, Sculptural Pendant Lights, Stone Lighting
Shipping
Free shipping applies to eligible addresses when the Free Shipping method appears at checkout. Review delivery conditions before ordering.
Shipping policyWarranty & Care
3-year limited warranty. Review covered defects, exclusions and care instructions.
Warranty & CareReturns & Refunds
Review return eligibility, approval steps and refund conditions before ordering.
Returns & Refunds policyProduct details
Product specifications and planning
A white alabaster ring hangs from three black supports in this Dalmivik pendant. The open center keeps the circular shape readable from below, while integrated 2700K LED lighting illuminates the stone band.
Key Features
- The black support frame draws a clear outline against the white stone.
- An open circular center gives the fixture a different profile from a solid drum shade.
- Integrated LED lighting removes the need to choose separate screw-base bulbs for this configuration.
Product Specifications
| Diameter | 19.7 in / 50 cm |
|---|---|
| Fixture body height | 7.8 in / 20 cm |
| Supplied wire length | 59 in / 150 cm; separate from fixture body height |
| Fixture type | Ring pendant |
| Materials | Metal and alabaster |
| Natural variation | Because natural stone is unique, each piece may vary slightly in color, veining, and pattern from the product images. |
| Finish | Black and White |
| Light source | Integrated LED |
| Maximum power | 40W |
| Weight | 26.46 lb / 12 kg |
| Certifications | UL / ETL / CE |
| Voltage | 110-120V / 220-240V |
| Color temperature | 2700K |
| Dimming | Dimmable |
| Warranty | 3 years |
Have your electrician match the dimmer to the integrated LED driver before installation.
Installation & Care
Mark the 19.7-inch circular footprint and check the view through the open center from below. The supplied wire length is separate from the body height. Have your electrician verify support, the final drop and dimmer-to-driver compatibility.
Use the applicable Dalmivik series general safety installation instructions. Hardwired fixtures must be installed by a qualified electrician. Switch off power before installation, cleaning, or service.
Unpack over a clean, padded surface and inspect each component before installation. Keep the packaging until the inspection is complete. Dust the alabaster and metalwork gently with a soft, dry microfiber cloth. Avoid water, chemical cleaners, abrasives and direct spray on electrical parts.
Frequently Asked Questions
Does this pendant need separate bulbs?
No separate screw-base bulbs are needed for this integrated LED configuration.
What color temperature does it provide?
The integrated LED is Warm White at 2700K.
Is it dimmable?
Yes. Have your electrician confirm a compatible dimmer for the integrated LED driver; do not choose a control solely by appearance.
Is the 59-inch wire measurement the fixture height?
No. The wire is separate. The fixture body measures 19.7 inches in diameter and 7.8 inches high.
What warranty applies?
The fixture has a 3-year limited warranty, subject to the coverage, exclusions and claim conditions in Warranty & Care. See the link in Product Specifications.
Product Related
Recently Viewed Products