A long slab of natural alabaster with softly rough edges is held at each end by a black bracket on a slim brass rod. Lit from within, it casts an even line of warm light over a dining table, kitchen island or desk.
Key Features
- Long natural alabaster slab
- Black end brackets on slim brass rods
- L 39.4 or 47.2 in; overall drop 59 in
- Integrated LED, about 34W
Product Specifications
| Fixture type |
Linear Pendant |
| Material |
Brass and natural alabaster |
| Finish |
White alabaster with black and brass |
| Light source |
Integrated LED, warm light, about 34W |
| Dimensions |
L 39.4 × H 59 in / L 100 × H 150 cm; L 47.2 × H 59 in / L 120 × H 150 cm (overall) |
| Switch |
Button switch (not dimmable) |
| Weight |
11.0 lb / 5 kg (shipping weight) |
| Suspension / mounting |
Two ceiling rods; hardwired; 59 in / 150 cm wire, lengthened on request; indoor |
| Installation |
Hardwired; professional installation by a qualified electrician |
| Voltage |
110-240V |
| Warranty |
3 years |
Installation & Care
Have a qualified electrician install this fixture. Verify that the mounting surface, electrical box and fixing hardware can support the fixture load. Disconnect power before installation or cleaning. Clean with a soft dry cloth and avoid abrasive cleaners.
Frequently Asked Questions
Which length should I choose?
About two-thirds the length of the table or island below.
What is the light source?
A built-in 3000K warm-white LED. There is no bulb to replace. It is not dimmable as standard.
Will my alabaster look exactly like the photos?
Alabaster is a natural stone, so the veining and tone differ from piece to piece. No two shades are identical.
What should be checked before installation?
A qualified electrician should verify the mounting surface, electrical suitability and installation clearances.