Two-Tier Alabaster Panel Rectangular Chandelier 40 in
- Product sizing & specification guidance
- Project quotation enquiries
- Replacement-part enquiries
- Shipping & delivery guidance
- 3-year limited warranty
- Electrical compatibility guidance
SKU: DK2610153011
Category: Alabaster Lighting, Dining Room Chandeliers, Fast Shipping, Statement Chandeliers, Stone Lighting
Shipping
Free shipping applies to eligible addresses when the Free Shipping method appears at checkout. Review delivery conditions before ordering.
Shipping policyWarranty & Care
3-year limited warranty. Review covered defects, exclusions and care instructions.
Warranty & CareReturns & Refunds
Review return eligibility, approval steps and refund conditions before ordering.
Returns & Refunds policyProduct details
Product specifications and planning
Two rectangular tiers of overlapping alabaster panels surround an open metal frame. Small metal fasteners punctuate the pale panels, while chains suspend the layered body.
Key Features
The staggered panel edges give the rectangular form a textured outline. A warm-metal finish frames the natural stone.
Product Specifications
| Fixture dimensions | 40 in width × 12.12 in height |
|---|---|
| Canopy | 15.74 in width |
| Suspension components | Five 12 in rods; two 6 in rods |
| Materials | Natural alabaster and metal |
| Natural variation | Because natural stone is unique, each piece may vary slightly in color, veining, and pattern from the product images. |
| Finish | Brass |
| Light source | 14 × E12 |
| Bulbs included | Yes |
| Weight | 48.5 lb / 22 kg |
| Certifications | UL / ETL / CE |
| Voltage | 110-120V / 220-240V |
| Color temperature | 2700K |
| Dimming | Dimmable |
| Warranty | 3 years |
Installation & Care
Have a qualified electrician verify ceiling support, mounting points, wiring, controls and final installed height. Switch off power before installation or service. Inspect every component before installation.
Frequently Asked Questions
How should I check the size?
Compare the fixture dimensions in the specifications table with the installation area. Canopy and suspension components are listed separately.
Which light source does it use?
The fixture uses 14 × E12. Confirm compatible lamps, controls and connections with your electrician.
Who should install the fixture?
A qualified electrician should confirm structural support, mounting, wiring and clearances before installation.
How should I handle the fixture?
Support the frame and each separate element during unpacking and assembly. Keep the packaging until inspection is complete.
How should I clean it?
Switch off the power before cleaning. Use a soft dry cloth and avoid abrasive or solvent cleaners.
Trade and project support
Plan the fixture around the room.
Share room dimensions, ceiling conditions, fixture quantity and project requirements with the Dalmivik team.