Embossed Bubble Glass Wall Sconce
Product details
Designed for considered interiors
The Embossed Bubble Glass Wall Sconce pairs a sculptural silhouette with iron, aluminum, and glass for artwork, bedrooms, hallways, dressing areas, and layered residential lighting. Its proportions and finish options support both residential selection and specification-led projects.
Why It Works
- The embossed clear-glass shade adds texture while preserving a light, compact wall profile.
- Aged brass brings warmth to timber, stone, and neutral palettes; matte black creates a sharper architectural contrast.
- The single-light format works alone in a narrow zone or as a balanced pair beside a mirror, artwork, bed, or console.
Dimensions & Options
| Aged Brass | Nominal size: 6 in / 15 cm; complete fixture, canopy, and suspension measurements are shown in the gallery dimension diagram. |
|---|---|
| Matte Black | Nominal size: 6 in / 15 cm; complete fixture, canopy, and suspension measurements are shown in the gallery dimension diagram. |
Product Specifications
| Model | LZ735 / LZ736 |
|---|---|
| Fixture type | Wall Sconce |
| Materials | Iron, aluminum, and glass |
| Finish | Aged brass, Matte black |
| Surface treatment | Stained |
| Light source | E12-85 |
| Light count | 1 |
| Voltage | 110-120V / 220-240V |
| Color temperature | 2700K |
| Dimming | Dimmable |
| Warranty | 3 years. View Warranty & Care. |
Installation & Planning
Professional installation by a qualified electrician is recommended.
Use the complete gallery drawing to coordinate the 12-inch overall height and 6-inch shade scale with the wall box, nearby trim, mirror edge, artwork, and furniture. When two sconces are specified as a pair, set the centerlines from the finished composition rather than from the rough wall alone. Leave enough clearance to remove the glass and service the E12 lamp after installation.
For bathroom, powder-room, or vanity placement, ask a qualified electrician to confirm the mounting location and local electrical requirements. This page does not state a damp-, wet-, or IP-rating.
Packaging & Care
Open the carton on a clean, padded surface and inspect the glass and finish before installation. Keep the glass supported while fitting or removing it. Dust with a dry microfiber cloth; avoid abrasive pads, solvent cleaners, and direct spray on the metal or electrical components.
Frequently Asked Questions
How do the available Embossed Bubble Glass Wall Sconce options compare?
Aged Brass: Nominal size: 6 in / 15 cm. Matte Black: Nominal size: 6 in / 15 cm. Compare the complete gallery drawing with the finished room before selecting an option.
What should be checked when positioning this wall sconce?
Aged Brass: Nominal size: 6 in / 15 cm. Matte Black: Nominal size: 6 in / 15 cm. Review the mounting height, projection, adjacent trim and furniture, and the view from normal standing and seated positions.
What should be confirmed when choosing lamps for this fixture?
Use lamps that match the confirmed fixture socket and physical clearance. The catalog color temperature is 2700K and the fixture is dimmable. A qualified electrician should verify lamp, socket and wall-dimmer compatibility before installation.
What should the electrician confirm before installation?
Use the complete gallery drawing to coordinate the 12-inch overall height and 6-inch shade scale with the wall box, nearby trim, mirror edge, artwork, and furniture. Voltage: 110-120V / 220-240V. A qualified electrician should verify the support, junction box, mounting or suspension, wiring, controls and local electrical requirements.
How should the Embossed Bubble Glass Wall Sconce be handled and cleaned?
Open the carton on a clean, padded surface and inspect the glass and finish before installation. Keep the glass supported while fitting or removing it. Dust with a dry microfiber cloth; avoid abrasive pads, solvent cleaners, and direct spray on the metal or electrical components.
Trade and project support
Plan the fixture around the room.
Share room dimensions, ceiling conditions, fixture quantity and project requirements with the Dalmivik team.