Sculpted Marble Petal Wall Sconce
Product details
Designed for considered interiors
The Sculpted Marble Petal Wall Sconce combines softly irregular marble-composite panels with a slender brushed titanium-gold frame. Available in two-, three-, and four-light configurations, the vertical composition can be scaled for artwork, bedside walls, hallways, dressing areas, vanities, and other layered residential lighting plans. Warm light reveals natural-looking tonal variation across the pale stone surface while the metalwork keeps the profile precise.
Why It Works
- The vertical petal arrangement adds sculptural texture without projecting far into the room.
- Two-, three-, and four-light formats make it easier to coordinate the fixture with different mirror, artwork, and furniture heights.
- Individual G9 lamps distribute warm illumination through each marble-composite panel.
Dimensions & Options
| Two-Light | 5.9 in W x 11 in H x 5.1 in D / 15 cm W x 28 cm H x 13 cm D; two G9 lamps. |
|---|---|
| Three-Light | 5.9 in W x 16.1 in H x 5.1 in D / 15 cm W x 41 cm H x 13 cm D; three G9 lamps. |
| Four-Light | 5.9 in W x 21.3 in H x 5.1 in D / 15 cm W x 54 cm H x 13 cm D; four G9 lamps. |
Product Specifications
| Model | LZ731 / LZ732 / LZ733 |
|---|---|
| Fixture type | Wall Sconce |
| Materials | Iron and marble-composite stone |
| Finish | Brushed titanium gold |
| Surface treatment | Electroplated |
| Light source | G9 lamps; quantity varies by configuration |
| Voltage | 110-120V / 220-240V |
| Color temperature | 2700K |
| Dimming | Dimmable |
| Warranty | 3 years. View Warranty & Care. |
Installation & Planning
Professional installation by a qualified electrician is recommended.
Set the wall-box centerline from the finished mirror, artwork, bed, console, or architectural feature rather than from the rough wall alone. When sconces are used as a pair, coordinate both centerlines, the fixture height, and clearances as one composition. Leave practical access for cleaning and G9 lamp replacement. For bathroom, powder-room, or vanity placement, a qualified electrician must confirm the location and applicable local electrical requirements; this page does not state a damp, wet, or IP rating.
Packaging & Care
Open the carton on a clean, padded surface and inspect the stone panels and finish before installation. Keep each panel supported during assembly. Dust with a dry microfiber cloth; avoid abrasive pads, solvent cleaners, direct spray, and pressure on panel edges or electrical components. Natural-looking tonal and vein variation is part of the material character.
Frequently Asked Questions
How do the available Sculpted Marble Petal Wall Sconce options compare?
Two-Light: 5.9 in W x 11 in H x 5.1 in D. Three-Light: 5.9 in W x 16.1 in H x 5.1 in D. Four-Light: 5.9 in W x 21.3 in H x 5.1 in D. Compare the complete gallery drawing with the finished room before selecting an option.
What should be checked when positioning this wall sconce?
Two-Light: 5.9 in W x 11 in H x 5.1 in D. Three-Light: 5.9 in W x 16.1 in H x 5.1 in D. Four-Light: 5.9 in W x 21.3 in H x 5.1 in D. Review the mounting height, projection, adjacent trim and furniture, and the view from normal standing and seated positions.
What light source and dimming setup does this fixture use?
The light source is G9 lamps; quantity varies by configuration. The catalog color temperature is 2700K and the fixture is dimmable. The selected lamps and wall dimmer must be compatible with each other.
What should the electrician confirm before installation?
Set the wall-box centerline from the finished mirror, artwork, bed, console, or architectural feature rather than from the rough wall alone. Voltage: 110-120V / 220-240V. A qualified electrician should verify the support, junction box, mounting or suspension, wiring, controls and local electrical requirements.
How should the Sculpted Marble Petal Wall Sconce be handled and cleaned?
Open the carton on a clean, padded surface and inspect the stone panels and finish before installation. Keep each panel supported during assembly. Dust with a dry microfiber cloth; avoid abrasive pads, solvent cleaners, direct spray, and pressure on panel edges or electrical components. Natural-looking tonal and vein variation is part of the material character.
Trade and project support
Plan the fixture around the room.
Share room dimensions, ceiling conditions, fixture quantity and project requirements with the Dalmivik team.