Framed Slab Open Frame Alabaster Vertical Wall Sconce
Product details
Product specifications and planning
Part of the Framed Slab Collection , this wall sconce frames a translucent alabaster panel within an architectural metal surround — a study in structured geometry where warm stone and crisp lines balance each other. Lit from within, the alabaster glows with a warm amber tone that highlights the stone's natural mineral striations. Because every piece is cut from a single block of alabaster, no two lamps are identical. Available Sizes W150×D65×H470mm W150×D65×H660mm Features Material: Brass Hardware + Natural Translucent Alabaster Finish: Black Bulb: 2 × E12 socket, max 40W, bulb not included Mounting: Hard-wired wall installation Authentic translucent alabaster — each stone hand-selected, no two pieces alike Exclusive to Dalmivik — counterfeit protection via authenticity certificate
Why It Works
Natural alabaster varies in color, translucency, veining, clouding, and mineral pattern. These differences are inherent characteristics rather than defects.
Dimensions & Options
| Model | Option | Price | Approx. net weight |
|---|---|---|---|
| DK260829470 | W5.9" × D2.6" × H18.5" (W15 × D6.5 × H47 cm) | $1380.00 | 6.06 lb / 2.750 kg |
| DK260829471 | W6" × D2.6" × H26" (W15.3 × D6.5 × H66 cm) | $1817.00 | 6.06 lb / 2.750 kg |
Product Specifications
Available to order. 3-year limited warranty; see Warranty & Care.
- Dimmable: Yes
- Voltage: 110–120V / 220–240V
Installation & Planning
Use the applicable Dalmivik series general safety installation instructions. Hardwired fixtures must be installed by a qualified electrician. Switch off power before installation, cleaning, or service. Dust alabaster with a soft, dry microfiber cloth and avoid water, chemical cleaners, and abrasives.
Packaging & Care
Keep protective packaging until inspection is complete. Dust with a soft, dry microfiber cloth and avoid water, chemicals, and abrasives.
Frequently Asked Questions
Will every piece of alabaster look identical?
No. Natural variation in color, veining, and translucency is expected.
Who should install a hardwired fixture?
A qualified electrician should complete installation in accordance with local requirements.
Which voltage configuration is supplied?
The applicable 110–120V or 220–240V destination configuration is supplied.
Can the light be dimmed?
Yes. Use a compatible dimmer and follow the applicable installation instructions.
How should the fixture be cleaned?
Use a soft, dry microfiber cloth and avoid water, chemicals, and abrasives.
Trade and project support
Plan the fixture around the room.
Share room dimensions, ceiling conditions, fixture quantity and project requirements with the Dalmivik team.