Faceted Crystal Linear Chandelier
Product details
Designed for considered interiors
The Faceted Crystal Linear Chandelier translates layered crystal into a format designed for long furniture lines. Its 32-inch nominal length follows a dining table, kitchen island, or hospitality counter, while ten E12 lights illuminate the crystal across the full frame. Brushed titanium-gold metalwork outlines the structure and adds a warm counterpoint to the clear faceted glass.
Why It Works
- The elongated form aligns with rectangular tables and islands more naturally than a round ceiling fixture.
- Ten E12 lights distribute illumination across the fixture length for an even visual rhythm.
- Multiple crystal tiers create depth while retaining open sightlines around the perimeter.
Dimensions & Options
| Fixture measurements | The verified fixture body measures 31.5 inches long by 11.8 inches wide by 16.1 inches high / 80 cm long by 30 cm wide by 41 cm high. It is commonly described as a nominal 32-inch chandelier. Use the complete gallery drawing to coordinate the canopy, chains, and final suspension. |
|---|
Product Specifications
| Model | LZ709 |
|---|---|
| Fixture type | Chandelier |
| Materials | Iron and faceted glass crystal |
| Finish | Brushed titanium gold |
| Surface treatment | Electroplated |
| Light source | Ten E12 lamps |
| Voltage | 110-120V / 220-240V |
| Color temperature | 2700K |
| Dimming | Dimmable |
| Warranty | 3 years. View Warranty & Care. |
Installation & Planning
Professional installation by a qualified electrician is recommended.
Set the canopy centerline from the finished table or island rather than from the room alone. Compare the verified fixture length with both ends of the furniture and preserve practical clearance from cabinets, tall appliances, doors, and circulation routes. Confirm the ceiling support, junction-box location, chain lengths, and final bottom-of-fixture height before installation. The frame should be level before the crystal is fully aligned.
Packaging & Care
Open the cartons on a clean, padded surface and keep crystal components separated until the metal frame is secured. Inspect the finish and every crystal element before installation. Dust with a dry microfiber cloth; avoid abrasive cleaners, solvents, direct spray, and pressure on crystal edges, chains, or canopy hardware.
Frequently Asked Questions
What dimensions should I confirm for the Faceted Crystal Linear Chandelier?
Fixture measurements: The verified fixture body measures 31.5 inches long by 11.8 inches wide by 16.1 inches high. Confirm the gallery drawing, canopy or mounting plate, suspension or projection, and required clearances before ordering.
How should this linear chandelier relate to a table or island?
Fixture measurements: The verified fixture body measures 31.5 inches long by 11.8 inches wide by 16.1 inches high. Compare the fixture length with the finished table or island, preserve clear space at both ends and review sightlines from adjoining rooms.
What light source and dimming setup does this fixture use?
The light source is Ten E12 lamps. The catalog color temperature is 2700K and the fixture is dimmable. The selected lamps and wall dimmer must be compatible with each other.
What should the electrician confirm before installation?
Set the canopy centerline from the finished table or island rather than from the room alone. Voltage: 110-120V / 220-240V. A qualified electrician should verify the support, junction box, mounting or suspension, wiring, controls and local electrical requirements.
How should the Faceted Crystal Linear Chandelier be handled and cleaned?
Open the cartons on a clean, padded surface and keep crystal components separated until the metal frame is secured. Inspect the finish and every crystal element before installation. Dust with a dry microfiber cloth; avoid abrasive cleaners, solvents, direct spray, and pressure on crystal edges, chains, or canopy hardware.
Trade and project support
Plan the fixture around the room.
Share room dimensions, ceiling conditions, fixture quantity and project requirements with the Dalmivik team.